Home » Articles posted by Paul Mitton

Author Archives: Paul Mitton


April 2024

The Basics of Hardwood Floor Refinishing

floorHardwood Floor Refinishing Bergen County NJ is a great way to add value and beauty to your home. It involves sanding, staining, and applying a protective sealant to your hardwood floors.

First, you must remove all furniture and other fixtures from the room where sanding occurs. You must also cover outlets with plastic tarps and tape to prevent dust from escaping.

If your floors are old and have a worn-down finish, it is necessary to sand them before you can apply a new coat of stain. This can be done by hand but is usually done with a pole or palm sander and medium-grade sandpaper (36, 40, 60, 80, 120). It is important to vacuum and wipe down your floors after each sanding round, especially before applying a finishing agent. This ensures that no dust or dirt is left behind on the floor, which could mar the final product.

When sanding your wood floors, it is crucial that you follow the grain of the wood. This will help keep your hardwood floor as even as possible and allow you to eliminate any scratches or dents on the surface. Wearing a respirator when sanding is also important to protect yourself from the dust.

After sanding your floor, it is a good idea to vacuum once again and wipe down the entire surface with a microfiber or tack cloth. This will ensure that there is no dust or dirt on the floor, which can cause the finish to dull or flake. It is also a good time to take this opportunity to fill in any nail holes or gouges with a wood putty that matches your floors.

Once you have sanded your floor, leaving the room for about an hour or two is a good idea to let the sanding process settle. Once you return, you can resume moving your furniture back into the room and you should vacuum once again to remove any dust that has settled.

You will need to sand again, this time with a finer grade of sandpaper (80 or 120). This will smooth out the grit marks that were created by the coarse paper and prepare your floor for the application of a new finish.

You will want to use a low-VOC finish for your floor. This will minimize indoor air pollutants and keep your family healthy. When you are finished, you should allow the finish to dry for 24 hours before you return to your home.


Staining is the next step of the refinishing process, and it allows homeowners to change the overall look of their wood floors. When done properly, staining is a great way to highlight the natural beauty of hardwood floors, while also adding a warm and cozy feel to the home. However, staining comes with some distinct drawbacks that should be understood before deciding to go through with this process.

One of the biggest issues with staining is that it can be extremely time consuming. Not only does the initial prep work have to be completed – including cleaning, sanding, and vacuuming the floor – but then there is a waiting period while the stain dries. The stain must dry completely before the protective hardwood floor coating can be applied, and if the weather is not cooperating then this wait can easily extend for up to a week or more.

Another issue with staining is that it can be difficult to get the exact color that a customer wants. While the little swatches provided by stain manufacturers provide an excellent general guide to the colors that will appear on the floor, they can vary slightly when actually applied. This can lead to frustration for the homeowner, as well as delays in the finishing process.

Finally, there is the possibility that the stain will not stay put and may start to peel. This can be caused by a number of factors, including the type of stain, the sanding sequence, humidity, and even the amount of air movement in the room. This can be very frustrating and require the floors to be re-stained, potentially adding more time and expense to the project.

If you’re thinking of staining your wood flooring, we recommend having the refinishing process completed by professionals who have experience with this process. They will be able to help you choose the perfect color and finish for your floors, and they can ensure that the stain is applied evenly and will last for years to come. They’ll also be able to advise you on any other steps that will need to be taken, such as prepping the floor for the stain and applying the protective hardwood flooring coating.


Hardwood floors are a timeless and beautiful addition to any home. But even the most stunning hardwood floors need a protective finish to keep them looking great for years. Whether your hardwood floor is made of rich walnut, warm cherry wood, or rustic oak, the best way to protect your investment is by applying a quality sealant. But before you can apply a new coat of sealant, you’ll need to sand the floor and stain it first.

This is a labor-intensive process, but it can completely revitalize your hardwood floors. It can also get rid of deep scratches, gouges, and discoloration that cannot be fixed with resealing alone. This process should only be done if you are happy with your existing color and want to refresh your hardwood floor’s shine and add an extra layer of protection.

During this step, it is important to make sure the room is well-ventilated. This is because the sanding process releases a lot of dust and other debris that can be harmful to your health. It is also recommended that you wear breathing protection during this stage to avoid respiratory irritation.

After you have vacuumed and blown away any remaining dust from the sanding process, you can start the sealing process. This should be done after the floors are completely dry from the sanding process, which should take about 48 hours. Before you begin, it is also a good idea to remove any furniture or drapes that are in the way of the work area. Once the sealant has been applied, it is important to let it dry completely before using your hardwood floors.

To ensure your sealant stays fresh and protected, you’ll need to reapply it once every five to seven years. This will help to extend the life of your hardwood floors and save you money in the long run by preventing costly repairs and replacements.

Depending on your lifestyle and the number of people living in your home, you may need to reseal more or less often than this. It is also a good idea to have your hardwood floors buffed and recoated or have an oil coat applied occasionally to prevent fading and maintain their sheen.


Buffing, also known as screening, is a floor finish process that is less extensive than sanding. It involves using a circular buffing machine to remove the top layer of polyurethane and bring it back up to a shine. A new coat of polyurethane is then applied to the surface, creating a smooth, shiny surface. While it won’t get rid of all scratches and scuffs, it will help reduce the appearance of them, making your hardwood floors look new again.

Before you start buffing, it is important to make sure that your flooring is completely clean and free of dust, debris, dirt, pet hair, or lint. If any of these particles are left behind, they could contaminate the final finish and cause it to flake or peel. You will want to thoroughly vacuum your floors and use a dust mop to get rid of any lingering particles.

It is possible to buff a stain-finished floor, but it’s best to do so before you apply the new coat of polyurethane. The buffed floor will need to be dry before you can apply the stain and will not take the color very well unless you “pop” the grain (applying a higher grit than what was used for the initial sanding).

In general, buffing is more common on urethane finished wood floors because it only addresses the top layer of polyurethane and protects the wood underneath it. The protective layer wears down over time and can become scratched and scuffed just like the rest of your floor, but it will be protected from further damage as long as you keep up with regular buffing.

It’s a good idea to have your urethane floors buffed and re-coated about every 3 years to extend their life. It’s kind of like putting on sunblock, you can still get a sunburn even when you’ve put on sunscreen, but it will be much less painful if you do it regularly before your skin becomes sun-burnt. Buffing is a lot cheaper and less time consuming than doing a full sand and refinish!



The Advantages of Payroll Services

Payroll services provide you with a number of benefits. Not only do you avoid the hassle of doing your payrolls, but you are also assured that the payments are being made correctly and on time. You can also monitor employee attendance and time spent at work, and you can prepare employment tax filings. In addition, you can print checks and set up direct deposits. 

Payroll ServiceProcess employee hours. Using an automated employee time tracking system can significantly improve your payroll process. Its ability to track employee time and attendance information in real-time can save your business a ton of time and money. Having access to a robust employee time-tracking solution also allows you to make more informed decisions on staffing levels, hours worked, and holidays.

There are many ways to go about putting together a solid employee time-tracking system. While there are many automated time-tracking services out there, you’ll want to do your homework to ensure your system is suited to your unique needs. In addition to using the aforementioned trolls, consider using a third-party vendor to perform the heavy lifting for you.

Whether you’re using a payroll service or doing your own checks, you’ll need the proper supplies. This includes check stock, magnetic ink, and a special MICR font. Many payroll services allow you to print checks directly from their software. This makes the process faster and more efficient. But it is also more likely to result in errors. Some services allow you to print a test to ensure the printer settings are correct before printing your checks. Check stock is a standard piece of paper that is specially coated and perforated to ensure your checks are secure. You’ll also need stamps for mailing checks. Some office supply stores also sell check stock.

Set up direct deposits. Using direct deposit to pay employees is a cost-effective way to keep track of your cash flow. It also reduces the amount of time you spend on the manual process of cashing checks.

The process of setting up direct deposit is simple. All you need are three numbers: a bank account number, a routing number, and a bank account holder’s name. The bank will determine the cost of the direct deposit.

The benefits of direct deposit are many. You can save on your printing and mailing costs and eliminate the need for employees to pick up checks at the bank. This also allows you to pay employees on time.

Payroll taxes can be a little confusing whether you’re a self-employed worker or an employer. The good news is that the IRS has created a comprehensive resource to help you understand the ins and outs of filing and paying employment tax. The site includes information on how to prepare Forms W-2 and W-3 and the employment tax obligations you’re responsible for.

Consider using a payroll service provider to help you handle the bulk of the payroll process. These services are designed to make payroll processes easy to manage. Many businesses have their own dedicated payroll administrator who manages the process for them.

Monitor employee attendance and time at work. Whether you’re running a small business or managing a large organization, it’s important to monitor employee attendance and time at work. This allows you to ensure your employees are working when they’re supposed to, and helps stay within your budget. It can also help you meet compliance requirements.

Using a time and attendance tracking software can help you manage schedules, improve productivity, and maintain accurate records. It can also help your business stay compliant with the Fair Labor Standards Act and other labor laws. Manual timesheets have been used for years but can be costly and inaccurate. Using a time and attendance tracking system makes it easy to maintain accurate records.

Ensure that employees are paid correctly and on time. Ensuring that employees are paid correctly and on time is an important part of any business’s day-to-day operations. A business must have a plan to ensure payroll is processed on time. If employees are paid late, this can lead to a host of complications and pitfalls.

One of the best ways to ensure that employees are paid correctly and on time is to have a robust time-tracking solution in place. The time-tracking software of choice should be able to integrate with payroll software to ensure that employees’ hours are tracked accurately. The software should also be able to calculate tax and leave automatically.